One article explains the malfunctions and maintenance issues of Panasonic steam oven!
The quality of the Panasonic steam oven is relatively high among all steam ovens, so the number of failures is not very frequent. However, after long-term use, no matter how good the steam oven is, it will inevitably develop various minor problems. Even if it is a Panasonic steam oven, some time ago it happened to turn to Hong Kong Junhong Electrical Repair to repair the problem of not being able to heat. So what are the specific problems with the steam oven? How to solve it?
1. Unable to boot
The inability to start is mostly due to a power failure, or possibly a motor failure. You can first choose to replace the plug to check. If it is a Hong Kong Junhong electrical repairman, he will use a multimeter to measure to see if there is power flowing through. If any abnormality is found, then directly replace the socket, or the power cord can be dealt with. If it is a motor problem, the motor needs to be replaced.
2. After turning on the machine, the corresponding temperature cannot be reached.
Generally, commercial Panasonic steam ovens will have multiple different temperature controls. The temperature can be adjusted according to the temperature for cooking. But if you find that the temperature you adjusted cannot be reached. That could be two problems.
1. The heating tube is faulty. There will be multiple different heating tubes inside the steam oven to increase the temperature. If the heating tube fails, heating will be affected. Usually it's because water vapor wets the heating tube, or it's possible that dirt damaged the heating tube. So just replace the heating tube.
2. The current passing through is relatively small, causing the heat of the device to fail to meet the standard. This may also be a motor problem. Just make adjustments.
3. The temperature adjustment panel is faulty. The temperature you may see is not the actual temperature. Simply replacing the control panel will solve the problem. But for knob-type temperature adjustment switches, this problem often does not exist.
3. Time adjustment failure
If you find that there is a problem with the steam oven time you adjusted, it is because the control panel is faulty. Usually it is because there is a problem with the system, resulting in non-standard time calibration. This problem can be solved by replacing the control panel or retuning the system.
Among the cases of Hong Kong Junhong electrical appliance repair, there are many commercial Panasonic steam ovens being repaired, because most restaurants are now using steam ovens. Because they are used for a long time and many times, the probability of failure will greatly increase. And finding a professional maintenance team is indispensable.
Comments