Procedure for replacing the glass of Fotile induction cooker

Procedure for replacing the glass of Fotile induction cooker

Although the glass panel of a commercial induction cooker is very strong, considering the high frequency of use of commercial induction cookers, it is inevitable that it will be damaged or cracked due to operating errors. Hong Kong Junhong Electrical Appliance Repair Center has replaced the glass panels of commercial induction cookers many times. Next, we will take the replacement of the glass of Fotile induction cooker as an example to introduce the operation process.

1. Replace the induction cooker glass

Cracks in the glass panels of commercial induction cookers are often caused by excessive force when using magnetic cookware. For example, Hong Kong Junhong Electrical Appliance Repair Center replaced the glass panel of a FOTILE commercial induction cooker last month. The specific process of replacing the glass of FOTILE induction cooker is as follows :

(1) Before replacing the FOTILE induction cooker glass, cut off the power first, and then clean the working area. For example, many induction cooker glass panels that are used all year round need to clean the impurities in the gaps first.

(2) Use a screwdriver to remove the fixing screws that fix the glass panel. Fotile’s fixing screws are mainly at the bottom and sides, and then use professional tools to pry open the glass.

(3) When prying the glass panel, pay attention to applying force gradually. Excessive force may cause the risk of glass cracking. Work forward step by step. After prying off the entire glass panel, clean up the remaining adhesive in time.

(4) When installing a new glass panel, ensure that the size is appropriate and pay attention to the position. After ensuring the installation position is correct, install it slowly and tighten the fixing screws.

(5) The last step to replace the glass of Fotile induction cooker is to apply sealant and clean around the panel. Wait until the sealant is completely solidified before use.

2. Select Fotile induction cooker glass

After mastering the process of replacing the glass of Fotile induction cooker, Hong Kong Junhong will share the tips for selecting induction cooker glass. Because customized induction cooker glass panels require periodic production, it is more efficient to directly replace the original model glass panel from the original manufacturer. The specific glass panel selection process is as follows :

(1) First check the brand and model of the commercial induction cooker. For example, the one replaced this time is the FOTILE CS34BW model. Information like this is marked on the sticker in the lower right corner of the induction cooker, or on the sticker on the power supply on the back.

(2) Confirm the model number to find the size of the glass panel. You can directly replace it with the original glass panel that is heat-resistant and impact-resistant. If you do not want to consider measuring the size, customize the glass panel.

The above is the process of replacing the glass panel of FOTILE induction cooker. In fact, the process of replacing the glass panel of other brands of induction cooker is similar. You can complete the glass panel replacement by yourself as long as you follow the steps. When using commercial induction cookers on a daily basis, you should also pay attention to the condition of the panel, whether there are cracks in the glass panel, etc. All should be paid attention to.