Fresh air systems have become the first choice for indoor temperature regulation equipment. Compared with traditional air conditioners or ventilation equipment, the entire equipment of the fresh air system is relatively simple. It can achieve the overall supply temperature and ventilation effects through a high-power fresh air equipment plus ducts. This saves space and is a very cost-effective system for large-scale shopping malls or offices. But once a problem occurs, not only this area will be affected, but the entire area will be affected, so repairs need to be done as quickly as possible and efficiently. This requires talking about the superb skills of Hong Kong Junhong electrical repair masters. In view of the problems that their masters will encounter, they briefly explain the faults and solutions of the fresh air system.
1. The host cannot be turned on normally.
After the host of the fresh air system has been used for a long time, it is often found that it cannot be turned on normally. This is most likely due to a problem between the power strip and the power link. After long-term use, the aging of the casing leads to leakage, the wiring parts are loose or there is too much dust, and malfunctions may occur. If you want to repair the fresh air system, you need to unplug the power supply and perform preliminary cleaning. After cleaning, check the power supply. It is very necessary to replace the power supply or replace the wiring board.
Second, temperature and wind speed cannot be controlled
Generally speaking, with the division management of the entire fresh air system, there are often independent controllers. For example, Midea's fresh air system is often used in large corporate venues. Therefore, an entire fresh air system requires a large number of independently controlled switches. But if it is found that the wind speed and temperature cannot be changed through operation. Then it may be a problem with the control panel and pipes.
1. Control panel, which is what we call the computer board. Often links various components and spare parts of the entire device. Once a failure occurs, it will affect the entire system. You can replace the control panel or remove it and let Hong Kong Junhong Electrical Maintenance Master handle it.
2. Pipeline failure problem. Pipeline problems generally come from two aspects. One is caused by blockage. It needs to be disassembled to check whether the pipe is smooth. The other is caused by a loose connection between the pipe and the actual system outlet. Just check the pipeline and snap the interface together.
The fresh air system problem is not difficult to judge because the whole system is simple. However, if you want to repair the fresh air system, you still need to ask a professional master to come to your door because disassembly and inspection require considerable experience.
Comments